Elevator COP, Elevator LOP

Our elevator car operating panel and elevator landing operation panel are divided into variety of models. All models of elevator COP and elevator LOP support signal input through seven segment code, BCD code, and serial communication methods. With the elevator COP and elevator LOP, the elevator status, such as Overload, Fire Control, Full Load, Stop, and In Inspection, can be displayed in the car and the hall. The elevator landing operation panel is compatible with both simplex and duplex connection methods.
1
2

COP1000A01
Product code: 113
COP1000A01 elevator COP and elevator LOP are made of hairline stainless steel, and offers flanging on left and right sides. They are recommended to use in combination with EB 420 and EB 430 elevator buttons.

Features
Material of panel: hairline stainless steel, flanging on left and right sides of the plate.
Type of input signal: seven-segment code, BCD code, and serial communication.
Display in the car and hall: Overload, Fire Control, Full Load, Stop, and In Inspection.
Hall landing operating panel: simplex type or duplex type.

COP1010
Product code: 117
The elevator COP and elevator LOP are made of mirror finished stainless steel, with brushed finished in the middle part of the operation panels. They are ideal for use in combination with our EB 210 and EB 410 elevator buttons.

Features
Material of panel
: hairline stainless steel, mirror finished stainless steel for left and right side of the elevator control panel, plastic seal on top and bottom end.
Type of input signal: seven-segment code, BCD code, serial communication.
Display in the car and hall: Overload, Fire Control, Full Load, Stop, In Inspection, and so on.
Hall landing operating panel: simplex type or duplex type.

COP1020
Product code: 118
COP1020 elevator car operating panel and elevator landing operation panel are made of mirror finished stainless steel, with titanium plated surface in golden color. We recommend using them in combination with our EB 410 and EBC 22 elevator buttons.

Features
Material of panel:
mirror finished stainless steel with golden titanium plated surface.
Type of input signal: seven-segment code, BCD code, serial communication.
Display in the car and hall: Overload, Fire Control, Full Load, Stop, In Inspection, etc.
Hall landing operating panel: simplex type or duplex type.

COP 120
Product code: 106
The elevator COP and elevator LOP are manufactured using hairline stainless steel and comes with mirror finish to assure aesthetical appearance. They are applicable for use in combination with EB210 and EB410 series of elevator buttons.

Features
Material of panel: hairline stainless steel, mirror finished stainless steel.
Type of input signal: seven-segment code, BCD code, serial communication.
Display in the car and hall: Overload, Fire Control, Full Load, Stop, In Inspection, among others.
Hall landing operating panel: simplex type or duplex type

EH981
Features
Material of panel: hairline bent stainless steel, plastic seal on both ends.
Installation: The faceplate is connected to the box by screws on both ends of the plate. The installation is quite easy.
Type of input signal: seven-segment code, serial communication.
Display in the car and hall: Full Load, Stop, etc.

EH983 / EHD983
Features
Material of panel: hairline bent stainless steel, plastic seal on both ends.
Installation: For easy installation, the faceplate is connected to the box by screws on both ends of the plate.
Type of input signal: seven-segment code, serial communication.


EH982 / EHD982
Features
Material of panel: hairline bent stainless steel, plastic seal on both ends.
Installation: Faceplate connected with box by the screws on both ends of the plate.
Type of input signal: seven-segment code, serial communication.
Display in the hall: Full Load, Stop, etc.

EH980 / EHD980
Features
Material of panel: hairline bent stainless steel, plastic seal on both ends.
Installation: the faceplate is connected to the box by screws on both ends of the plate for easy installation.
Type of input signal: seven segment code, serial communication

COP810X
Features
Material of panel: hairline stainless steel with four bent sides welded into a whole.
Installation: this multi-function elevator COP and LOP is generally mounted on the car wall as an assisted operating panel for the handicapped. The faceplate is connected to the box by clip. The installation is quite easy.

COP811
Features
Material of panel: hairline stainless steel, mirror finished stainless steel
Installation: As the assisted operating panel for the main operating panel, this disabled elevator controller is generally installed on the car wall, fixed to the box by clips

COP 511
Features
Material of panel: hairline stainless steel, mirror finished stainless steel. The display is separated from the operation part.
Type of input signal: seven segment code, BCD code, serial communication.
Display in the car and hall: Overload, Fire Control, Full Load, Stop, In Inspection, etc.
Hall landing operating panel: simplex type or duplex type

COP920A01
Features
Material of panel: hairline stainless steel, mirror finished stainless steel
Type of input signal: seven-segment code, BCD code, serial communication
Display in the car and hall: Overload, Fire Control, Full Load, Stop, In Inspection, and so on.
Hall landing operating panel: simplex type or duplex type

COP221
Features
Material of panel: hairline stainless steel, mirror finished stainless steel
Type of input signal: seven-segment code, BCD code, serial communication.
Display in the car and hall: Overload, Fire Control, Full Load, Stop, In Inspection, etc.
Hall landing operating panel: simplex type or duplex type

COP211
Features
Material of panel: hairline stainless steel, mirror finished stainless steel.
Type of input signal: seven-segment code, BCD code, serial communication.
Display in the car and hall: overload, fire control, full load, stop, In Inspection, and so on.
Hall landing operation panel: simplex type or duplex type

As an experienced elevator COP, elevator LOP manufacturer based in China, our company offers a variety of products that includes integrated full serial VVVF control cabinet, general vector inverter, elevator group control system, and more.
Other Products
    1. Fixed Wiring and Non-sheathed Cable
    2. Fixed Wiring and Non-sheathed Cable

      300/300V: 1.5KV (AC)/5min, no breakdown; 300/500V: 2.0KV (AC)/5min, no breakdown; 450/750V: 2.5KV(AC)/5min,no breakdown 3C Certificate No.: 2003010105082949, 2004010105119784, 200401010519789 Lead Free Environmental Performance: Our non-sheathed elevator cable fully conforms to the requirement on heavy metal content specified by the EU RoHS.

    1. PVC Insulated Soft Cable(5 Cores or below 5)
    2. PVC Insulated Soft Cable(5 Cores or below 5)

      Insulation Resistance at 70°C: Complies withGB5023.5-2008 (idt IEC227-5: 1985) requirement Finished Product Voltage Withstand Test: 2.0KV (AC)/5min, no breakdown Product Certificate: 3C Certificate No.: 2003010105082952; CE Certificate No.: CE-LVD-0502 Lead Free Environmental Performance: The heavy metal element content in our PVC insulated soft wire fully complies with EU RoHS requirements

Inquiry Form